Product Overview/Applications

With its unique ability to adapt to four different research applications, the MF1000 offers an economical and flexible equipment platform. The base chamber itself can be fitted with one of four specially configured kits, and each kit is specifically designed for a particular application including:

• Plant growth
• Arabidopsis
• Tissue culture
• Incubation

By varying the configuration of the airflow, light, and shelving, each kit defines one of the four applications. The MA1000 is also available with several options such as phenolic coated coils and network communication. The phenolic coated coils enable the MF1000 to be used for entomology research while the communications option facilitates connection to a facility’s local area network.

Lighting

The lighting systems for the MF1000 incorporate high
efficiency T5H0 fluorescent lamps. Lighting system
configuration is determined by the application kit where
each kit stipulates a particular light intensity and lamp
canopy configuration. Lamp and ballast combinations have
been designed to ensure a balanced light spectrum while
light intensity levels are adjusted (AR & PG Kits only)
through a stepped selection process.

Airflow

Precisely designed and manufactured air plenums are used for each of the four application kits. The Plant Growth kit utilizes a solid rear plenum which discharges air from the floor for a uniform upward airflow. The Arabidopsis and Incubation kits both use a perforated rear plenum which discharges the air horizontally for maximum condition uniformity in view of the use of flats or similar research vessels. The Tissue Culture configuration incorporates individual air-shelves that discharge air vertically to reduce or eliminate condensation within media dishes.

Refrigeration

The standard air-cooled refrigeration system is optimized to ensure adequate capacity for delivery of uniform conditions regardless of the particular kit installed. Kits do not alter the configuration of the refrigeration system and as such, kits can be exchanged with minimal effort.

Experiment Protection

User programmable alarms for key parameters such as temperature and humidity monitor the actual conditions within the chamber and notify the User with both audible and visual alarms. Additional factory pre-set alarms monitor system integrity while an alarm history recorder tabulates alarm events for historical reference and service.

Key Product Attributes

• Single chamber uniquely adaptable to four different applications
• Precisely designed airflow and lighting configurations for each application
• Castors for ease of mobility
• Product certifications/markings: CE

The post Plant Growth Chamber Multi Functional first appeared on New Meditech.

The post Plant Growth Chamber Multi Functional appeared first on New Meditech.

• • Plant growth
  • Arabidopsis
  • Tissue Culture
  • Incubation
    by varying the configuration of the airflow, light, and shelving, each kit defines one of the four applications. the a1000 is also available with several options such as phenolic coated coils and network communication. The phenolic coated coils enable the a1000 to be used for entomology research while the communications option facilitates connection to a facility’s local area network.

Lighting
the lighting systems for the a1000 incorporate high efficiency t5 fluorescent lamps. Lighting system configuration is determined by the application kit where each kit stipulates a particular light intensity and lamp canopy configuration. Lamp and ballast combinations have been designed to ensure a balanced light spectrum while light intensity levels are adjusted (aR & pG Kits only) through a stepped selection process.

Airflow
precisely designed and manufactured air plenums are used for each of the four application kits. the plant Growth kit utilizes
a solid rear plenum which discharges air from the floor for a uniform upward airflow. The arabidopsis and Incubation kits both use a perforated rear plenum which discharges the air horizontally for maximum condition uniformity in view of the use of flats or similar research vessels. the tissue Culture configuration incorporates individual air-shelves that discharge air vertically to reduce or eliminate condensation within media dishes

Refrigeration
The standard air-cooled refrigeration system is optimized to ensure adequate capacity for delivery of uniform conditions regardless of the particular kit installed. Kits do not alter the configuration of the refrigeration system and as such, kits can be exchanged with minimal effort.

Experiment Protection
User programmable alarms for key parameters such as temperature and humidity monitor the actual conditions within the chamber and notify the user with both audible and visual alarms. additional factory pre set alarms monitor system integrity while an alarm history recorder tabulates alarm events for historical reference and service.

Key Product Attributes

• • • • Single chamber uniquely adaptable to four different applications
      • Precisely designed airflow and lighting configurations for each application
      • Castors for ease of mobility
      • Product certifications/marking: CE

The post Plant Growth Chamber multi Application first appeared on New Meditech.

The post Plant Growth Chamber multi Application appeared first on New Meditech.

Plant Growth Chamber
Model	Internal Capacity	Growth Area	Growth Height	External Dimension	Catalog
PLANT GROWTH CHAMBER
MA1000	35ft3 (1000l)	Upto 22.6 ft²(2.1m²)	upto 45″(1065mm)	41.75” x 32.5” x79.5” (1040mm x 825mm x 2020mm)	Download
MTAC26	52ft3 (1471l)	26ft2(2.4m2)	24” (610mm)	95” x 35” x 78” (2415mm x 890mm x 1980mm)	Download
MTAC40	103ft3 (2195l)	38ft2(3.6m2)	32” (810mm)	100” x 35.5” x 101” (2540mm x 900mm x 2565mm)	Download
MTAC60	103ft3 (2915l)	57ft2(5.2m2)	20” (545mm)	100” x 35.5” x 116” (2540mm x 900mm x 2965mm)	Download
MBDR16	88.5ft3 (2500l)	16.2ft2(1.5m2)	65” (1650mm)	105” x 36” x 89” (2675mm x 915mm x 2260mm)	Download
ME8	32ft3 (900l)	8ft2(0.74m2)	46” (1180mm)	71.25” x 29.5” x 76.25” (1810mm x 750mm x 1935mm)	Download
ME7-2	17ft3 (480l)	8.2ft2(0.76m2)	23.5″ (605mm)	72” x 29.5” x 78.5” (1830mm x 750mm x 2000mm)	Download
MTR26	26ft3 (736l)	26ft2(2.4m2)	24” (610mm)	94.5” x 35” x 78” (2415mm x 890mm x 1980mm)	Download
MTR30	31 ft3(940 L)	30ft2(2.79m2)	25” (635mm)	104” x 35” x 78” (2640mm x 890mm x 1980mm)	Download
MPGC20	103ft3 (3145l)	20ft2(1.9m2)	59” (1500mm)	100” x 35.5” x 101” (2540mm x 900mm x 2565mm)	Download
MPGR14	69.5ft3 (1968l)	14.4ft2 (1.34m2)	58.25” (1480mm)	95” x 35” x 83.5” (2415mm x 890mm x 2120mm)	Download
MPGR15	78ft3 (2220l)	16.1ft2(1.5m2)	57” (1450mm)	104” x 35” x 78” (2640mm x 890mm x 1980mm)	Download
MPGC Flex	111 ft3	19 ft2(1.8 m2)	59″.75 (1520 mm)	100”W x 35.5”D x 101”H	Download
PLANT GROWTH ROOM
MBDW40	316ft3 (8920l)	40ft2(3.7m2)	95” (2415mm)	120” x 70” x 114.25” (3050mm x 1780mm x 2900mm)	Download
MBDW80	640 ft³(18075 L)	80.9 ft²(7.5 m²)	95” (2415mm)	120” x 132.25” x 114.25” (3050 x 3385 x 2900 mm)	Download
MBDW120	964 ft³ (27130 L)	121.7 ft²(11.3 m²)	95” (2415mm)	120” x 196.25” x 114.25” (3050 x 4991 x 2900 mm)	Download
MTPS72	366 ft³ (10364 L)	72 ft²(6.6 m²)	20”(508 mm)	139” x 70” x 110.25” (3530 x 1780 x 2800 mm)	Download
MTPS144	706 ft³ (19992 L)	144 ft²(13.2 m²)	20”(508 mm)	139” x 127.5” x 110.25 (3530 x 3240 x 2800 mm)	Download
MTPS216	1045ft3 (29590 l)	216 ft2(19.9m2)	20”(508 mm)	139” x 185” x 110.25” (3530 x 4700 x 2800 mm)	Download
MTPS288	1317ft3 (37293l)	288ft2(26.5m2)	20”(508 mm)	139” x 231” x 110.25”(3530 x 5868 x 2800 mm)	Download
MTPS360	1653ft3(46808l)	360 ft2(33.1m2)	20”(508 mm)	139” x 288.5” x 110.25” (3530 x 7328 x 2800 mm)	Download
MTPS432	1996ft3(56520l)	432 ft2(39.7m2)	20”(508 mm)	139” x 346” x 110.25” (3530 x 8800 x 2800 mm)	Download
MTCR 60	99ft3(2820l)	60ft2(5.6m2)	20”(508 mm)	10’7.5” x 5’10” x 9’2.25” (3240 x 1780 x 2800 mm)	Download
MTCR 120	190ft3(5640l)	120ft2 (11.2m2)	20”(508 mm)	10’7.5” x 10’7.5” x 9’2.25” (3240 x 3240 x 2800 mm)	Download
MTCR 180	290ft3(8460l)	180ft2(16.7m2)	20”(508 mm)	10’7.5” x 15’5” x 9’2.25”(3240 x 4700 x 2800 mm)	Download
MGR48	320 ft³(9130 L)	48 ft² (4.5 m²)	80”(2030 mm)	116” x 116” x 102.25”(2950 x 2950 x 2600 mm)	Download
MGR64	420 ft³(11900 L)	64 ft²(5.9 m²)	80”(2030 mm)	139” x 116” x 102.25”(3530 x 2950 x 2600 mm)	Download
MGR96	640ft3 (17900l)	96ft2(8.9m2)	80”(2030 mm)	116” x 208” x 102.25”2950 x (5285 x 2600 mm)	Download
MGR128	850ft3(23960l)	128ft2(11.9m2)	80”(2030 mm)	139” x 208” x 102.25”(3530 x 5285 x 2600 mm)	Download
MGR144	960ft3(26800l)	144ft2(13.4m2)	80”(2030 mm)	116” x 300” x 102.25” (3530 x 5285 x 2600 mm)	Download
MGR192	1280ft3(36000l)	192ft2(17.9m2)	80”(2030 mm)	139” x 300” x 102.25” (3530 x 5285 x 2600 mm)	Download
MCG72	480 ft³(13600 L)	72 ft²(6.7 m²)	80”(2030 mm)	9’8” x 12’6.5” x 9’6.25” (2950 x 3825 x 2900 mm)	Download
MCG108	720 ft³(20300l)	108ft2(10m2)	95” (2415 mm)	9’8” x 17’4” x 9’6.25” (2950 x 5285 x 2900 mm)	Download

The post Tissue Culture Chamber first appeared on New Meditech.

The post Tissue Culture Chamber appeared first on New Meditech.

Tissue Culture Chamber MTC80 is specifically designed for the growth of tissue culture. With four shelves and a top-mounted refrigeration system, the Tissue Culture Chamber TC80 provides an exceptional growth area-to-footprint ratio. The four shelves channel the airflow upward which acts to minimize the formation of condensation inside the lids of Petri dishes and other tissue culture vessels. Please consult Meditech regarding specific requirements for Tissue Culture Chamber.

Product Overview/Applications

The Tissue Culture Chamber MTC80 is specifically designed for the growth of tissue culture. With four shelves and a top-mounted refrigeration system, the Tissue Culture Chamber MTC80 provides an unprecedented growth area-to foot print ratio. The four shelves channel the airflow upward which acts to minimize the formation of condensation inside the lids of Petri dishes and other tissue culture vessels. Please consult Meditech regarding specific requirements Tissue Culture Chamber.

Lighting – Tissue Culture Chamber

Standard lighting for the Tissue Culture Chamber MTC80 is energy efficient fluorescent lamps. The lamps are separated from the growth area by a transparent barrier which minimizes heat transfer to the growing cultures. Lamp and ballast heat are controlled and managed by the refrigeration system. Lighting control provides three light levels and is monitored by a quantum light meter and displayed in micromoles/m²/s on the controller’s status screen for user readout.

Airflow – Tissue Culture Chamber

Airflow is distributed uniformly upward from each air shelf which helps to ensure a consistent temperature zone over each shelf Tissue Culture Chamber. Filtered and adjustable fresh air intake and exhaust openings enable researchers to exchange air to the chamber in a controlled manner up to 20ft3/min (0.57m3/min.) in Tissue Culture Chamber.

Refrigeration – Tissue Culture Chamber

Cooling for the Tissue Culture Chamber MTC80 is provided by a top mounted water cooled condensing unit with hot gas bypass for continuous compressor operation. Tissue Culture Chamber An electronic modulating valve provides tight temperature control while ensuring quiet operation. Pressure transducers are included for monitoring the status of the refrigeration system. Alternative refrigeration methods are available depending on site-specific and/or user-defined requirements Consult the factory for heat rejection Information and other options for cooling

Experiment Protection – Tissue Culture Chamber

User programmable “set and forget” alarms track the chamber’s operation versus user-defined set points Tissue Culture Chamber. This allows for exceptionally accurate monitoring without the need for adjustment every time the set point is redefined in Tissue Culture Chamber. Backup “high/low” alarms provide a further level of protection while visual and audible notification is provided when any alarm is activated. Contacts for connection to a building management system are also included.

Key Product Attributes – Tissue Culture Chamber

• Four conditioned shelves providing 80 ft2 of culture area in a small footprint

• Small footprint relative to growth area in Tissue Culture Chamber

• Top-mounted machine compartment minimizes footprint, accommodates serviceability, and simplifies installation

• Upward airflow through each shelf to minimize the formation of condensation on vessels

• Tissue Culture Chamber Product certifications/markings : CE

The post Tissue Culture Chamber MTC80 first appeared on New Meditech.

The post Tissue Culture Chamber MTC80 appeared first on New Meditech.

Meditech is the largest manufacturer and exporter of Tissue Culture Chamber MTC30

The MTC30 Tissue Culture Chamber is specially designed for tissue culture research and development. The growth height obtained is 25” (635mm).The Meditech Tissue culture chamber can also be used for short plants which require low intensity of light. The chamber is provided with two shelves. The flow of air is upward.The upward flow minimizes condensation inside tissue culture vessel.The MTC30 Tissue Culture Chamber shipped by Meditech is fully assembled and goes through standard doors. Just plug and play type of configuration.

Lighting – Tissue Culture Chamber

T8 Fluorescent lamp and halogen incandescent lamps are used for standard lighting for MTC30 Tissue Culture Chamber.The light fixtures are fitted above the shelf. The refrigeration system is designed to remove heat from lights and ballast. 3 light levels arr programmed. This is monitored using quantum light meter. The value is displayed on Touch Screen in micromoles/m²/s.

Airflow – Tissue Culture Chamber
Air is distributed uniformly inside each shelf of the chamber. 20ft3/min (0.57m3/min) of fresh air can be introduced inside the chamber in controlled manner by researcher.

Refrigeration System – Tissue Culture Chamber
The tissue culture Chamber is provided with air cooled refrigeration system.

The post Tissue Culture Chamber MTC30 first appeared on New Meditech.

The post Tissue Culture Chamber MTC30 appeared first on New Meditech.

The Plant Growth Room MCG series of walk-in chambers provides an outstanding growth area-to-footprint ratio. Upward airflow is delivered using Meditech’s Uni-floor system allowing plants to be distributed throughout the entire floor area. These Plant Growth Room are typically used for both short and tall plant applications requiring moderate to high level light intensities. Plant Growth Room Multiple lamp canopies enable researchers to vary the distance from the light sources to research specimens. Temperature uniformity is assured via an upward airflow pattern Plant Growth Room.

Product Overview/Applications

The Plant Growth Room MCG series of walk-in chambers provides an outstanding growth area-to-footprint ratio. Upward airflow is delivered using Meditech’s Uni-floor system allowing plants to be distributed throughout the entire floor area. These chambers are typically used for both short and tall plant applications requiring moderate to high level light intensities. Multiple lamp canopies enable researchers to vary the distance from the light sources to research specimens. Temperature uniformity is assured via an upward airflow pattern for Plant Growth Room.

Lighting – Plant Growth Room

The standard lighting package for the Plant Growth Room MCG series is a moderate level light intensity which incorporates both fluorescent and incandescent lamps. This helps to ensure a broad based light spectrum that is ideally suited for plant growth. Multiple lighting levels are provided with the ability to program lamp groups separately for Plant Growth Room. Manually adjustable Light right canopies enable the researcher to easily raise and lower the lamps to the desired height. Higher light intensities area available on this model Plant Growth Room.

Airflow – Plant Growth Room

Uniform airflow is introduced to the growth area through Meditech’s patented Uni-floor which produces a precise volume of air, directed upward through the plant material. Plant Growth Room Filtered and adjustable fresh air intake and exhaust openings enable researchers to exchange air to the chamber in a controlled manner.

Refrigeration – Plant Growth Room

Cooling for the Plant Growth Room MCG series is provided by a self contained water-cooled condensing unit with hot gas bypass for continuous compressor operation. An electronic modulating valve provides tight temperature control while ensuring quiet operation. Pressure transducers are included for monitoring the status of the refrigeration system in Plant Growth Room. Alternative refrigeration methods are available depending on site-specific and/or user defined requirements. Consult the factory for heat rejection information and other refrigeration options Plant Growth Room.

Experiment Protection – Plant Growth Room

User programmable “set and forget” alarms track the chamber’s operation versus user-defined set points for Plant Growth Room. This allows for exceptionally accurate monitoring without the need for adjustment every time the set point is redefined. Backup “high/ low” alarms provide a further level of protection while visual and audible notification is provided when any alarm is activated. Contacts for connection to a building management system are also included Plant Growth Room.

Key Product Attributes – Plant Growth Room

• Multiple lamp canopies for varying plant maturity levels

• Efficient growth area-to-footprint ratio Plant Growth Room

• Light right for enhanced flexibility of light intensity

• Plant Growth Room Product certifications/markings; CE

The post Plant Growth Room MCG first appeared on New Meditech.

The post Plant Growth Room MCG appeared first on New Meditech.

The MGR series of plant growth room , available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of chamber offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech plant growth room which affords greater energy efficiency and economy. The multi lamp canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity plant growth room.

Product Overview/Applications – plant growth room

The MGR plant growth room , available in six standard sizes, is a highly economical platform for providing a controlled environment in a walk-in configuration. This series of plant growth room offers low to moderate level light intensities using multiple light canopies. The temperature range is narrower than on other Meditech walk-in chambers which affords greater energy efficiency and economy. The multi-lamp-canopy configuration enables researchers to have several experiments running simultaneously with plants at varying levels of maturity.

Lighting – plant growth room

The standard lighting package for the plant growth room MGR series is a low to moderate level light intensity design that incorporates both fluorescent and incandescent lamps. This ensures a broad based light spectrum that is ideally suited for plant growth room. Multiple lighting levels are provided with the ability to program lamp groups separately while the adjustable Light right canopy enables the researcher to easily raise and lower the lamps to the desired height. Higher light intensities area available on this model plant growth room.

Airflow – plant growth room

The airflow in plant growth room design directs air downward along the center aisle way. Air is then redirected returning upward between the plants and through the lamp canopies. Filtered and adjustable fresh air intake enables researchers to exchange air to the chamber in a controlled manner.

Refrigeration – plant growth room

Cooling for the MGR series is provided by a self-contained water-cooled condensing unit with hot gas bypass for continuous compressor operation. An electronic modulating valve provides tight temperature control while ensuring quiet operation. Pressure transducers are included for monitoring the status of the refrigeration system. Alternative refrigeration methods are available depending on site-specific and/or user defined requirements. Consult the factory for heat rejection information and other refrigeration options plant growth room.

Experiment Protection – plant growth room

User programmable “set and forget” alarms track the chamber’s operation versus user-defined set points. plant growth room allows for exceptionally accurate monitoring without the need for adjustment every time the set point is redefined. Backup “high/ low” alarms provide a further level of protection while visual and audible notification is provided when any alarm is activated. Contacts for connection to a building management system are also included plant growth room.

Key Product Attributes – plant growth room

• Multiple lamp canopies for varying plant maturity levels

• Efficient growth area-to-footprint ratio

• Economical platform for plant growth room

• Light right for enhanced flexibility of light intensity

• plant growth room Product certifications/markings; CE

The post Plant Growth Room MGR first appeared on New Meditech.

The post Plant Growth Room MGR appeared first on New Meditech.

The Plant Growth Room BDW series walk-in chamber is based on a modular platform available in increments of 40 ft² (3.7 m²). Plant Growth Room offer a precise chamber environment typical of research involving C4 high-light plants grown to maturity. Unique to this Plant Growth Room is the top-down airflow pattern which ensures consistent plant canopy temperatures throughout the chamber. Spectral aluminum on the interior walls produces exceptional light uniformity, while the discreet lamp loft area uses a separate cooling system to mitigate heat produced by the lighting system.

Product Overview/Applications

The Plant Growth Room MBDW series walk-in chamber is based on a modular platform available in increments of 40ft2 (3.7m2). These Plant Growth Room offer a precise chamber environment typical of research involving C4 high-light plants grown to maturity. Unique is the top-down airflow pattern which ensures consistent plant canopy temperatures throughout the chamber. Spectral aluminum on the interior walls produces unparalleled light uniformity, while the discreet lamp loft area uses a separate cooling system to mitigate heat produced by the lighting system.

Lighting – Plant Growth Room

The standard lighting package for the Plant Growth Room MBDW series chamber generates moderate to high level light intensity and incorporates metal halide and tungsten incandescent lamps. The result is a broad based light spectrum ideally suited for plant growth in Plant Growth Room. The optional lighting packages available include higher intensities as well as programmable closed-loop lighting control in Plant Growth Room.

Airflow – Plant Growth Room

Plant Growth Room Utilizing an innovative design, a top-down airflow pattern uniformly disperses conditioned air from the top of each plenum and returns the air through conditioning coils located at the bottom of the chamber area. Using an independent ventilation and conditioning system for the lamp loft helps to reduce heat transfer to the chamber area for Plant Growth Room. Filtered and adjustable fresh air intake and exhaust openings enable researchers to manage exchange air to the chamber.

Refrigeration – Plant Growth Room

Cooling for the Plant Growth Room MBDW series is provided by a self contained water-cooled condensing unit with hot gas bypass for continuous compressor operation. An electronic modulating valve provides tight temperature control while ensuring quiet operation in Plant Growth Room. Pressure transducers are included for monitoring the status of the refrigeration system. Alternative refrigeration methods are available depending on site-specific and/or user defined requirements. Consult the factory for heat rejection information and other refrigeration options for Plant Growth Room.

Experiment Protection – Plant Growth Room

Plant Growth Room User programmable “set and forget” alarms track the chamber’s operation versus user-defined set points. This allows for exceptionally accurate monitoring without  the need for adjustment every time the set point is redefined. Backup “high/low” alarms provide a further level of protection while visual and audible notification is provided when any alarm is activated. Plant Growth Room Contacts for connection to a building management system are also included.

Key Product Attributes – Plant Growth Room

• High light availability with unparalleled light uniformity Plant Growth Room

• Discrete lamp loft mitigates heat transfer to chamber area

• Top down airflow for uniform plant canopy temperatures

• Extended height for growth of large plants to maturity in Plant Growth Room

• Modular design to accommodate larger sizes

• Plant Growth Room Product certifications/markings : CE

The post Plant Growth Room MBDW first appeared on New Meditech.

The post Plant Growth Room MBDW appeared first on New Meditech.

The Plant Growth Chamber MPGC FLEX offers the ultimate in flexibility. In its standard configuration, the Plant Growth Chamber operates as a single-tier highlight growth chamber with a counterbalanced light canopy and upward airflow. A simple conversion alters the chamber’s configuration to either a double or triple tier configuration with medium light intensity and horizontal airflow. In a footprint slightly larger than 21.5 ft2 (2 m2), the Plant Growth Chamber FLEX provides either 19 ft2 (1.8 m2), 38 ft2 (3.6 m2), or 57 ft2 (5.2 m2) of growth area with corresponding growth heights of 59.75″ (1520 mm), 25″ (635 mm), and 14″ (355 mm), respectively. The unique flexibility of the Plant Growth Chamber MPGC FLEX makes it ideal for use in facilities with multiple research programs. Please consult Meditech regarding specific requirements for Plant Growth Chamber  .(See specifications for single-tier with upward airflow below.)

Product Description

The Plant Growth Chamber MPGC FLEX offers the ultimate in flexibility. In its standard configuration, the Plant Growth Chamber operates as a single-tier highlight growth chamber with a counterbalanced light canopy and upward airflow. A simple conversion alters the chamber’s configuration to either a double or triple tier configuration with medium light intensity and horizontal airflow. In a footprint slightly larger than 21.5 ft2 (2 m2), the FLEX provides either 19 ft2 (1.8 m2), 38 ft2 (3.6 m2), or 57 ft2 (5.2 m2) of growth area with corresponding growth heights of 59.75″ (1520 mm), 25″ (635 mm), and 14″ (355 mm), respectively Plant Growth Chamber.

The unique flexibility of the MPGC FLEX makes it ideal for use in facilities with multiple research programs. Please consult Meditech regarding specific requirements.(See specifications for single-tier with upward airflow below.)

The post Plant Growth Chamber MPGC Flex first appeared on New Meditech.

The post Plant Growth Chamber MPGC Flex appeared first on New Meditech.

The MS10H plant growth chamber offers wide–range humidity control. Plant pathology, entomology, and plant physiology are prime examples of the type of research and teaching programs that are suitable with the plant growth chamber MS10H and that can benefit from its humidity control capabilities. The plant growth chamber MS10H accommodates tall plants, with its generous 59” (1500mm) growth height, and offers 10ft² (0.93m²) of growth area. Barriered and ventilated canopies reduce the load on the refrigeration system thereby lowering operating costs. Please consult Meditech for your specific requirements.

Product Overview/Applications

The plant growth chamber MS10H plant growth chamber offers a wide–range humidity control. Plant pathology, entomology, and plant physiology are prime examples of the type of research and teaching programs that are suitable with the plant growth chamber MS10H and that can benefit from its humidity control capabilities. The plant growth chamber MS10H accommodates tall plants, with its generous 59” (1500mm) growth height, and offers 10ft2 (0.9 m3) of growth area. Barriered and ventilated canopies reduce the load on the refrigeration system thereby lowering operating costs. Please consult Meditech for your specific requirements for plant growth chamber.

Lighting – plant growth chamber

The standard lighting system on the plant growth chamber MS10H provides a broad based light spectrum for plant growth by employing a combination of fluorescent and incandescent lamps. The lamps are housed within a barriered canopy which reduces heat transfer to the growth area in plant growth chamber. Excess heat in the canopy is ventilated to ambient. Standard light intensity is 500 micromoles/m2/s which is measured by a quantum light meter and transmitted to the controller for user readout. Standard lighting control provides four levels per lamp type in plant growth chamber.

Airflow – plant growth chamber

Airflow for the plant growth chamber MS10H is distributed uniformly upward using Meditech’s innovative Uni-floor air distribution plenum plant growth chamber. The unit includes fresh air intake and exhaust which are adjustable up to 10ft3/min (0.28m3/min.) which also helps to ensure adequate ambient gas exchange in plant growth chamber.

Refrigeration – plant growth chamber

Cooling in plant growth chamber is provided by a self-contained air-cooled condensing unit with hot gas bypass for continuous compressor operation plant growth chamber. An electronic modulating valve provides tight temperature control while ensuring quiet operation in plant growth chamber. Pressure transducers are included for monitoring the status of the refrigeration system. Consult the factory for heat rejection information and alternative refrigeration methods for plant growth chamber.

Experiment Protection – plant growth chamber

User programmable “set and forget” alarms track the chamber’s operation versus user-defined set points in plant growth chamber. This allows for exceptionally accurate monitoring without the need for adjustment every time the set point is redefined for plant growth chamber. Backup “high/low” alarms provide a further level of protection while visual and audible notification is provided when any alarm is activated. Contacts for connection to a building management system are also included.

Key Product Attributes – plant growth chamber

• Wide-range humidity control as a standard feature

• Barriered and ventilated canopies reduce refrigeration system load and operating costs.

• Shipped fully assembled – plant growth chamber fits through standard doorways

• plant growth chamber Product certifications/markings : CE

The post Plant Growth Chamber MS10H first appeared on New Meditech.

The post Plant Growth Chamber MS10H appeared first on New Meditech.