The MPGR14 provides a 14.4ft2 (1.34 m2) growth area and a 58.25″ (1480mm) growth height making this chamber suitable for a range of applications including plant science, bioengineering, and soil and food sciences. Shipped fully assembled, the Plant Growth Chamber MPGR14 fits through standard doorways. The chamber comes standard with a closed-loop lighting system that uses 5-foot (1.5 m) lamps mounted into fixed canopies. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options for Plant Growth Chamber.
|Specification Of Plant Growth Chamber MTPGR14
|Temperature Range||+10°C to +45°C lights on|
|Controller & Display||7″ Touch Screen Controller|
|Growth Area||14.4ft2 (1.34m2)|
||58.25” (1480mm) Plant Growth Chamber
|External Dimensions||95” x 35” x 83.5” (2415mm x 890mm x 2120mm)|
|Internal Capacity||69.5ft3 (1968l)|
|Electrical Service||120/208-3Ø-60Hz (220/380-3Ø-50Hz)|
|Light Intensity||875 μmoles/m2/s
The Plant Growth Chamber MPGR14 provides a 14 ft2 growth area and a 58 inch growth height making this chamber suitable for a range of applications including plant science, bioengineering, and soil and food sciences. Shipped fully assembled, the Plant Growth Chamber MPGR14 fits through standard doorways. The chamber comes standard with a closed loop lighting system that uses 5-foot lamps mounted into fixed canopies. Please consult Plant Growth Chamber Meditech with your particular application and area o research and we will provide you with an overview of the available options Plant Growth Chamber.
Lighting – Plant Growth Chamber
The standard light intensity for the Plant Growth Chamber MPGR14 is 865 micromoles/ m2/s using both fluorescent and incandescent lamps. The result is a broad based lighting spectrum. Also standard is a closed loop lighting system (programmed in micromoles) which allows for precise and repeatable control of light output while also automatically adjusting for lumen maintenance. Lamp heat is controlled and managed by the refrigeration system in Plant Growth Chamber.
Airflow – Plant Growth Chamber
Airflow for the Plant Growth Chamber MPGR14 is distributed uniformly upward using Meditech’s innovative Uni-floor air distribution plenum. This airflow configuration promotes uniformity as well as proper gas exchange at the plant’s leaf surface for Plant Growth Chamber. The unit includes fresh air intake and exhaust ports which are adjustable to allow up to 20 ft3/ min (0.57m3/min.) of air exchange.
Refrigeration – Plant Growth Chamber
Cooling for the Plant Growth Chamber MPGR14 is provided by a side mounted water cooled condensing unit with hot gas bypass for continuous compressor operation. An electronic modulating valve provides tight temperature control while ensuring quiet operation in Plant Growth Chamber. Pressure transducers are included for monitoring the status of the refrigeration system. Alternative refrigeration methods are available depending on site-specific and/or user-defined requirements . Consult the factory for heat rejection information and other options for cooling Plant Growth Chamber .
User programmable “set and forget” alarms track the chamber’s operation versus user-defined set points in Plant Growth Chamber . This allows for exceptionally accurate monitoring without the need for adjustment every time the set point is redefined. Backup “high/low” alarms provide a further level of protection while visual and audible notification is provided when any alarm is activated. Contacts for connection to a building management system are also included in Plant Growth Chamber.
Key Product Attributes – Plant Growth Chamber