The Plant Growth Chamber MPGR15 offers 16 ft2 (1.5 m2) of growth area and 57 inches (1450 mm) of growth height making it suitable for a range of applications including the growth of many tall plant species to full maturity. Standard is a counter balanced light canopy system. Shipped fully assembled, the Plant Growth Chamber MPGR15 fits through standard doorways. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options Plant Growth Chamber.
|Specification Of Plant Growth Chamber MPGR15
|Temperature Range||+10°C to +45°C lights on|
|Controller & Display||7″ Touch Screen Controller|
|Growth Area||16.2ft2 (1.5m2)|
||57” (1450mm) Plant Growth Chamber
|External Dimensions||104” x 35” x 78” (2640mm x 890mm x 1980mm)|
|Internal Capacity||78ft3 (2220l)|
|Electrical Service||120/208-3Ø-60Hz (220/380-3Ø-50Hz)|
|Light Intensity||875 μmoles/m2/s
The Plant Growth Chamber MPGR15 offers 16 ft2 of growth area and 57 inches of growth height making it suitable for a range of applications including the growth of many tall plant species to full maturity. Standard is a counter balanced light canopy system. Shipped fully assembled, the Plant Growth Chamber MPGR15 fits through standard doorways. Please consult Meditech with your particular application and area of research and we will provide you with an overview of the available options.
Lighting – Plant Growth Chamber
The light intensity for the Plant Growth Chamber MPGR15 is 875 micromoles/m2/s using both fluorescent and incandescent lamps which results in a broad based lighting spectrum. Lighting in Plant Growth Chamber is switched in four levels for each lamp type and is monitored by a quantum light meter and displayed in micromoles/m²/s on the controllers status screen for user readout. Also standard is a counter-balanced light canopy, with 6-foot lamps, which enables height adjustment between the lamp canopy and the research material. Lamp heat is controlled and managed by the refrigeration system in Plant Growth Chamber.
Airflow – Plant Growth Chamber
Airflow for the Plant Growth Chamber MPGR15 is distributed uniformly upward using Meditech’s innovative Uni-floor air distribution plenum. The Plant Growth Chamber includes fresh air intake and exhaust ports which are adjustable to allow up to 20 ft3/min (0.57m3/min.) of air exchange.
Refrigeration – Plant Growth Chamber
Cooling for the Plant Growth Chamber MPGR15 is provided by a self-contained water cooled condensing unit with hot gas bypass for continuous compressor operation. An electronic modulating valve provides tight temperature control while ensuring quiet operation. Pressure transducers are included for monitoring the status of the refrigeration system in Plant Growth Chamber Alternative refrigeration methods are available depending on site-specific and/or user defined requirements. Consult the factory for heat rejection information and other refrigeration options for Plant Growth Chamber.
Experiment Protection – Plant Growth Chamber
User programmable “set and forget” alarms track the chamber’s operation versus user-defined set points Plant Growth Chamber. This allows for exceptionally accurate monitoring without the need for adjustment every time the set point is redefined. Backup “high/low” alarms provide a further level of protection while visual and audible notification is provided when any alarm is activated. Contacts for connection to a building management system are also included in Plant Growth Chamber.
Key Product Attributes – Plant Growth Chamber
• 16 ft2 of growth area and 57 inches of growth height – suitable for tall plant species to full maturity
• Counter balanced lighting system with 6-foot lamps Plant Growth Chamber
• Shipped fully assembled – fits through standard doorways in Plant Growth Chamber
• Product certifications/markings; (NRTL), CE